Home Automation Forum - PLC-BUS smart power line communication
http://plc-bus.info/

PLCBUS 4023 3 phaase
http://plc-bus.info/viewtopic.php?f=45&t=1759
Page 1 of 1

Author:  Riestad [ Tue 22. Nov 2011, 17:18 ]
Post subject:  PLCBUS 4023 3 phaase

Hey all,

I'm trying to setup this module for 3 phase use.
Could someone point me in the right direction ?

Feel free to answer in German / English / Dutch :)

Regards,
Richard

Author:  PLCBUSguru [ Tue 22. Nov 2011, 18:29 ]
Post subject:  Re: PLCBUS 4023 3 phaase

English:
for 3 phase mode you have to send the PLC-BUS command for address set up as 3 phase command.

Deutsch: ;)
Um das Modul für die 3-Phasen Kommunikation zu programmieren muss der PLC-BUS Befehl für den Adress-Setup als 3-Phasen Befehl an das Modul gesendet werden.

Dutch:
??????? :D

Author:  Riestad [ Tue 22. Nov 2011, 20:13 ]
Post subject:  Re: PLCBUS 4023 3 phaase

Danke für deine Antwort :)

I have this programming tool PLCBUS-T 4034GE.
I was able to setup the 3 phase coupler to 3 phases but cannot find the command to do this for the 4023.

Any info on the command that needs to be send to this module to function in 3 phase mode ?
Help is greatly appreciated.

Regards,
Richard

Author:  Riestad [ Wed 23. Nov 2011, 20:05 ]
Post subject:  Re: PLCBUS 4023 3 phaase

Thanks for your reply!

I have this unit to program PLCBUS-T 4034GE.
What commands do i need to send to the 4023 to enable the 3 phase modus ?

Regards,
Richard

Author:  Riestad [ Mon 28. Nov 2011, 09:41 ]
Post subject:  Re: PLCBUS 4023 3 phaase

Thanks for your reply.

What commands need to be send to this unit to enable the 3phase mode.

I have this controller to programm my units : PLCBUS-T 4034GE

Regards,
Richard

Author:  PLCBUSguru [ Fri 2. Dec 2011, 17:31 ]
Post subject:  Re: PLCBUS 4023 3 phaase

you have to set up 4034 into 3 phase mode and send to command as 3 phase command.

Author:  Riestad [ Fri 2. Dec 2011, 17:49 ]
Post subject:  Re: PLCBUS 4023 3 phaase

I cannot find any documentation on signal to send.
The 4034 is already in 3 phase modus, and works like à charm.

Is there some documentation to this subject ?

Regards,
Richard

Author:  PLCBUSguru [ Fri 2. Dec 2011, 20:04 ]
Post subject:  Re: PLCBUS 4023 3 phaase

user manual micro modules

Micro modules documentation is only documentation for this issue!

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/